Condensate formation is unavoidable. It is always a “by-product” of compressed air generation and spreads throughout the entire compressed air network. Around two thirds of the condensate is produced in the aftercooler. The rest occurs anywhere in the network as the compressed air cools down. This problem is inherent in the system and can cause both damage and higher costs.
The solution is a condensate drainage system adapted to the actual amount produced. This will cut costs and prevent damage. BEKOMAT® condensate drains – designed for the electronically level-controlled discharge of the condensate in compressed air networks – functions without unnecessary loss of compressed air and with minimal energy input.
BEKOMAT® from BEKO has become the industrial standard because of its high reliability and particularly because it offers energy-saving operation without loss of compressed air. There are a number of very good technical reasons for this.
Compared with float drains, BEKOMAT® has decisive advantages, especially since it functions unaffected by dirt, resulting in reliable operation, is equipped with a fault signal, requires very little maintenance and has a large cross-sections to prevent emulsification.
BEKOMAT® also has decisive advantages over solenoid valves, especially since it operates in accordance with the actual condensate quantity, avoids unnecessary loss of compressed air, is equipped with a fault signal and has large cross-section value to prevent emulsification.
A wide range of models makes it possible to select a suitable and cost-effective device for each particular application. The device can be adapted to all the usual supply voltages.
Your benefits;
- No unnecessary loss of compressed air
- Discharge adapted to condensate quantity
- Sensor registers every type of condensate
- Unaffected by dirt
- Low maintenance
- Fully automatic monitoring
BEKOMAT® is leading the way in condensate drainage.
Request product literature or more information